| Bayani | Bakin Karfe Coil Tubing | ||
| Material&Standard& Girman | Abu: 201,202,301,304,304L,310S,316,316L,321,347 Standard:ASTM (ASME) SA / A312/A213/A269 ,DIN,JIS,EN | ||
| Fita Diamita: Φ6mm-25mm Kaurin bango: Φ0.7mm-2.11mm Haƙuri: OD: ± 0.08mm, WT: ± 10% | |||
| Tsawon | Dangane da girma dabam dabam, tsayin coil ɗaya yana tsakanin mita 500 gabaɗayan bututun nada ba a welded ba. | ||
| Maganin Sama | Pickling Ko Yaren mutanen Poland Annealed | ||
| Na fasaha | Cold mirgina da farko, sa'an nan sanyi jawo coil | ||
| Nau'in Bayarwa | Mai laushi | ||
| Nau'in | Sumul kuma Welde | ||
| Aikace-aikace | Bakin karfe nada tubing ana amfani da ko'ina a Oil hakowa, Chemical, SteamShip Manufacturing Industry, Heat Exchange da sanyaya Condenser Chemical Industry, Gas bututu da dai sauransu | ||
Bakin Karfe Grade
| Haɗin Sinadari | Abun Haɗawa | 201 | 304l | 304 | 316 | 316l |
| C | ≤0.15 | ≤0.03 | ≤0.08 | ≤0.08 | ≤0.03 | |
| Si | ≤1.00 | ≤1.00 | ≤1.00 | ≤1.00 | ≤1.00 | |
| Mn | 5.5-7.5 | 7.5-10 | ≤2.00 | ≤2.00 | ≤2.00 | |
| P | ≤0.06 | ≤0.035 | ≤0.035 | ≤0.035 | ≤0.035 | |
| S | ≤0.03 | ≤0.03 | ≤0.03 | ≤0.03 | ≤0.03 | |
| Cr | 16-18 | 18-20 | 18-20 | 16-18 | 16-18 | |
| Ni | 3.5-5.5 | 8-12 | 8-10.5 | 10-14 | 10-14 | |
| Mo | 2.0-3.0 | 2.0-3.0 | ||||
| Kayan Injiniya | Abun Abu | 201 | 304l | 304 | 316 | |
| Ƙarfin Ƙarfin Ƙarfi | ≥535 | ≥520 | ≥520 | ≥520 | ||
| Ƙarfin Haɓaka | ≥245 | ≥205 | ≥205 | ≥205 | ||
| Tsawaita | ≥30% | ≥40% | ≥35% | ≥35% | ||
| Hardness (HV) | <253 | <200 | <200 | <200 | ||
Lokacin aikawa: Janairu-20-2023