Haɗin SinadariBakin Karfe 304
Tebur 1.Chemical abun da ke ciki na 304 bakin karfe gami
| % | 304 | 304l | 304H |
| C | 0.0 - 0.07 | 0.0 - 0.03 | 0.04 - 0.08 |
| Mn | 0.0 - 2.0 | 0.0 - 2.00 | 0.0 - 2.0 |
| Si | 0.0 - 1.00 | 0.0 - 1.00 | 0.0 - 1.0 |
| P | 0.0 - 0.05 | 0.0 - 0.05 | 0.0 - 0.04 |
| S | 0.0 - 0.03 | 0.0 - 0.02 | 0.0 - 0.02 |
| Cr | 17.50 - 19.50 | 17.50 - 19.50 | 17.00 - 19.00 |
| Ni | 8.00 - 10.50 | 8.00 - 10.50 | 8.00 - 11.00 |
| Fe | Ma'auni | Ma'auni | Ma'auni |
| N | 0.0-0.11 | 0.0-0.11 | 0.0 - 0.10 |
KayayyakiBakin Karfe 304
Kayayyakin InjiniBakin Karfe 304
Table 2 a.Kayan aikin injiniya don 304 bakin karfe gami - takardar har zuwa kauri 8 mm
| Daraja | 304 | 304l | 304H |
| Ƙarfin Tensile (MPa) | 540-750 | 520-700 | - |
| Tabbacin Damuwa (MPa) | 230 Min | 220 Min | - |
| Tsawaita A50 mm | 45 min% | 45 min% | - |
Table 2b. Kayan aikin injiniya don 304 bakin karfe gami - farantin karfe daga kauri 8 - 75 mm
| Daraja | 304 | 304l | 304H |
| Ƙarfin Tensile (MPa) | 520-720 | 500-700 | - |
| Tabbacin Damuwa (MPa) | 210 Min | 200 Min | - |
| Tsawaita A5 | 45 min% | 45 min% | - |
Table 2c.Kayan aikin injiniya na 304 bakin karfe gami - mashaya da sashi har zuwa diamita 160 mm / kauri
| Daraja | 304 | 304l | 304H |
| Ƙarfin Tensile (MPa) | 500-700 | 500-700 | 500-700 |
| Tabbacin Damuwa (MPa) | 190 | 175 Min | 185 Min |
| Tsawaita A50 mm | 45 min% | 45 min% | 40 min% |
| Hardness Brinell | 215 Max HB | 215 Max HB | - |
Abubuwan JikiBakin Karfe 304
Table 3.Kaddarorin jiki don 304 bakin karfe gami
| Dukiya | Daraja |
| Yawan yawa | 8.00 g/cm 3 |
| Matsayin narkewa | 1450 ° C |
| Modulus na Elasticity | 193 GPA |
| Juriya na Lantarki | 0.72 x 10-6 Ω.m |
| Thermal Conductivity | 16.2 W/mK |
| Thermal Fadada | 17.2 x 10-6/K |
Aikace-aikace Na Capillary Tube
Ana amfani da bututun capillary a masana'antar sinadarai, man fetur, lantarki, kayan haɗi, jiyya, sararin samaniya, kwandishan, kayan aikin likita, kayan dafa abinci, magunguna, kayan samar da ruwa, injin abinci, samar da wutar lantarki, tukunyar jirgi.
- Masana'antar Na'urar Likita: Bututun allura, bututun allura mai huda, bututun masana'antar likitanci
- Bututun zafi na masana'antu, bututun mai masana'antu
- Bututun kayan aiki
- Bututun mota
- Abinci masana'antu tube
Bakin Karfe Capillary Tube Chart Size
OD/T 0.05 - 0.07 0.07 - 0.1 0.1 - 0.14 0.14 - 0.19 0.19 - 0.24 0.24 - 0.39 0.39 - 0.49 0.49 - 0.99 0.99 - 1.4 1.4 - 2.0 0.2 - 0.3 0.3 - 0.4 0.4 - 0.5 0.5 - 0.8 0.8 - 1.0 1.0-1.5 1.5-2.0 2.0 - 2.5 2.5 - 3.0 3.0 - 3.5 3.5 - 4.0 4.0 - 5.0 5.0 - 6.0 6.0 - 8.0 *Raka'a Shine Mm.
Lokacin aikawa: Agusta-17-2023