316L bakin karfe 6.25 * 0.8mm nannade tubing capillary tubing
UNS - S31600 / S31609 / S31603 / S31635
316L bakin karfe 6.25 * 0.8mm nannade tubing capillary tubing
Bakin Karfe Grade 316 shine austenitic chromium-nickel bakin karfe ya hada da molybdenum.Wannan ƙari yana ƙara juriya na lalata, yana haɓaka juriya ga pitting ion chloride mafita kuma yana ba da ƙarfin faɗaɗa a yanayin zafi.Kayayyaki iri ɗaya ne da na nau'in 304 ban da waccan 316 sun ɗan fi ƙarfi a yanayin zafi.An inganta juriya na lalata, musamman akan sulfuric, hydrochloric, acetic, formic da tartaric acid, acid sulfates da alkaline chlorides.
316L bakin karfe 6.25 * 0.8mm nannade tubing capillary tubing
Bakin Karfe Grade 316L low carbon austenitic chromium-nickel bakin karfe tare da lalata juriya iri 316 duk da haka tare da juriya ga intergranular lalata bin waldi.
316L bakin karfe 6.25 * 0.8mm nannade tubing capillary tubing
Bakin Karfe Grade 316H shine babban bambancin carbon na 316 yana sa ƙarfe ya fi dacewa don amfani a aikace-aikace inda akwai yanayin zafi.Balanced Grade 316Ti yana ba da kwatankwacin halaye.Faɗaɗin abun ciki na carbon yana ba da mafi girman juzu'i da ƙarfin samarwa.Tsarin austenitic na kayan kuma yana ba da wannan ƙimar kyakkyawan ƙarfi, har zuwa yanayin zafi na cryogenic.
316L bakin karfe 6.25 * 0.8mm nannade tubing capillary tubing
Bakin Karfe Grade 316Tishine Titanium daidaitawa fitar da austenitic chromium-nickel bakin karfe ya hada da molybdenum.Wannan tsawo yana ƙara juriya na lalata, yana haɓaka juriya ga pitting ion chloride mafita kuma yana ba da ƙarfin faɗaɗa a yanayin zafi.Kaddarorin sun kasance kamar na nau'in 316 ban da 316Ti saboda ƙari na Titanium ana iya amfani dashi a yanayin zafi mai girma.Ana haɓaka juriya na lalata, musamman akan sulfuric, hydrochloric, acetic, formic da tartaric acid, acid sulfates da alkaline chlorides.
Halaye
- Juriya mafi girma
- Kyakkyawan tsari.
- Rushewa da ƙarfi mai ƙarfi a babban yanayin zafi
- Lalata da juriya
316L bakin karfe 6.25 * 0.8mm nannade tubing capillary tubing
Aikace-aikace
- Kayan aikin shirya abinci, musamman a wuraren chloride
- sarrafa sinadaran, kayan aiki
- Laboratory benci da kayan aiki
- Roba, robobi, ɓangaren litattafan almara & injin takarda
- Kayan aikin sarrafa gurɓatawa
- Kayan aikin jirgin ruwa, ƙima da datsa famfo
- Masu musayar zafi
- Masana'antar harhada magunguna da masana'anta
- Condensers, evaporators da tankuna
316L bakin karfe 6.25 * 0.8mm nannade tubing capillary tubing
Juriya na Lalata
Nau'o'in 316 da 316L Bakin Karfe suna nuna juriyar lalata da aka fi dacewa akan Nau'in 304. Suna ba da juriya mai kyau da kuma juriya mai kyau ga yawancin sinadarai da ke da hannu a masana'antar yadi, takarda da masana'antar hoto.
Machining
Don taurin aiki, jinkirin gudu da abinci mai nauyi za su rage girman wannan gami.Saboda dogayen stringy chips, ana ba da shawarar yin amfani da na'urori masu karya guntu.Ƙungiyoyi da yawa a yanzu suna ba da ƙimar injin ƙira, misali CarTech tare da jerin ayyukan su na 70 da 7000.
Walda
316L bakin karfe 6.25 * 0.8mm nannade tubing capillary tubing
Duk tsarin hadewa na yau da kullun da tsarin juriya baya ga waldar oxyacetylene sun tabbatar da nasara.Don samun sakamako mafi kyau, yana amfani da AWS E/ER316 ko 316L ƙarfe mai cikawa.
Zafafan Aiki
Duk tsarin aiki mai zafi na gama gari yana yiwuwa tare da wannan gami.Zafi zuwa 2100-2300 F (1149-1260 C).Guji yin aiki da wannan abu a ƙarƙashin 1700 F (927 C).Don ingantaccen juriya na lalata, ana ba da shawarar annealing bayan aiki.
Cold Aiki
Ana iya yin nasarar aiwatar da wannan gami tare da taimakon shearing, stamping, heading and zane.Ana ba da shawarar annealing bayan aiki don cire damuwa na ciki.
Annealing
1850-2050 F (1010-1121 C) ya biyo baya da sauri sanyaya.
Taurare
Wannan gami baya amsa maganin zafi.Aikin sanyi zai haifar da karuwa a duka taurin da ƙarfi.
Haɗin Sinadari%
| Daraja | C | Si | P | S | Cr | Mn | Ni | Cu | Mo | Ti | Fe |
| Alamar 316 | 0.08 max | 0.75 max | 0.045 max | 0.030 max | 16.0 - 18.0 | 2.0 max | 10.0 - 14.0 | - | 2.0 - 3.0 | - | Rago |
| Farashin 316L | 0.03 max | 0.75 max | 0.045 max | 0.030 max | 16.0 - 18.0 | 2.0 max | 10.0 - 14.0 | - | 2.0 - 2.0 | - | Rago |
| Farashin 316H | 0.04 - 0.10 | 0.75 max | 0.045 max | 0.030 max | 16.0 - 18.0 | 2.0 max | 10.0 - 14.0 | - | 2.0 - 3.0 | - | Rago |
| Alloy 316Ti | 0.08 max | 1.0 max | 0.040 max | 0.030 max | 16.0 - 18.0 | 2.0 max | 10.0 - 14.0 | 0.075 max | 2.0 - 3.0 | 5 x (C+N) - 0.07 | Rago |
Kayayyakin Injini
| Daraja | Ƙarfin Tensile (ksi) | 0.2% Ƙarfin Haɓaka (ksi) | Tsawaita% a cikin inci 2 |
| 316 / 316H / 316Ti | 75 | 30 | 40 |
| 316l | 70 | 25 | 40 |
Abubuwan Jiki
| Raka'a | Zazzabi a cikin ° C | |
| Yawan yawa | 7.99g/cm³ | Daki |
| Takamaiman Zafi | 0.12 Kcal/kg.C | 22° |
| Rage Narkewa | 1371 - 1421 ° C | - |
| Modulus na Elasticity | 193 KN/mm² | 22° |
| Juriya na Lantarki | 74µΩ.cm | Daki |
| Adadin Faɗawa | 16.0µm/m °C | 20 - 100 ° |
| Thermal Conductivity | 16.2 W/m -°K | 100° |
Bayanin ASTM
| Bututu / Tube (SMLS) | Sheet / Plate | Bar | Ƙirƙira | Daidaitawa |
| 213, A 249 | 167, A240 | A 276 | A 182 | A 403 |
